Standard Stock Dimensions

 

Home / Lift Products / Service/Goods Lifts / Standard Stock Dimensions

Model Capacity (kgs) Entrance Options Landing Entrance (mm) Internal Car (mm) Shaft Serving Height *Pit Depth **Headroom
Width Height Width Depth Height Width Depth
250C 250 With concertina landing entrance doors. 765 1375 1000 1000 1375 1320 1320 Floor Level 310 2590
250H 250 With hinged landing entrance doors. **Car Entrance

900

 1375 1000 1000 1375 1320 1320 Floor Level 310 2590
250CP 250 With concertina landing entrance doors and mid-bar picket gate fitted to lift car 760 1240 **Internal Car

1000

 **Internal Car

950

 **Internal Car

1350

 1320 1320 Floor Level 350 2590
250HP 250 With hinged landing entrance doors and mid-bar picket gate fitted to lift car 785 1240 **Internal Car

1000

 **Internal Car

950

 **Internal Car

1350

 1320 1320 Floor Level 350 2590

* IMPORTANTS NOTICE: PIT & HEADROOM

The Trolleylift normally serves at floor level and would required a pit in the lowest floor. If you are unable to provide a pit the Trolleylift can be installed to serve at 310mm above the lowest floor. The pit and headroom dimensions can be further reduced by modifying our stock models.

** NOTE:

When the car is fitted with collapsible picket gates on a through or adjacent entry arrangement, the car depth / width is reduced by a further 50mm nominal.

 

 

Model Capacity (kgs) Entrance Options Landing Entrance (mm) Internal Car (mm) Shaft Serving Height *Pit Depth **Headroom
Width Height Width Depth Height Width Depth
300H 300 With hinged landing entrance doors. 900 1800 1000 1000 1800 1320 1320 Floor Level 570 3000
300C 300 With concertina landing entrance doors. ** Car Entrance 765 **Car Entrance 1800 1000 1000 1800 1320 1320 Floor Level 570 3000
300HP 300 With hinged landing entrance doors and mid-bar picket gate fitted to lift car 785 1665 ** Internal Car

1000

 **Internal Car

950

 **Internal Car

1775

 1320 1320 Floor Level 570 3000
300CP 300 With concertina landing entrance doors and mid-bar picket gate fitted to lift car 760 1665 ** Internal Car

1000

 **Internal Car

950

 **Internal Car

1775

 1320 1320 Floor Level 570 3000

* IMPORTANTS NOTICE: PIT & HEADROOM

The Trolleylift normally serves at floor level and would required a pit in the lowest floor. If you are unable to provide a pit the Trolleylift can be installed to serve at 570mm above the lowest floor.

 

** NOTE:

When the car is fitted with collapsible picket gates on a through or adjacent entry arrangement, the car depth / width is reduced by a further 50mm nominal.