Home /
Lift Products / Service/Goods Lifts
● To view standard
stock dimensions for Service Lifts
Click here
● To view standard
stock dimensions for Goods Lifts
Click here
●
Contact Us
Click here
Service Lift Range
- 50 & 100 kg
We can supply and install a range of electric
goods only service lifts to cater for every lifting requirement, from food,
laundry and documents to beer crates and barrels, small trolleys and industrial
equipment.
Our service lifts operates inside a self
supporting frame which requires minimal builders work and eliminates the need
for a motor room or a load bearing well.
Most models are available within 5 -10 working
days and can generally be installed within 5 working days.
Up to three-way entry on every floor to provide
most convenient access positions.
The finish of a car and shutters can be tough
grey baked enamel or stainless steel.
The service lifts will operate on either 415V 3
phase or 240V single phase.
To select the model to suite the on-site shaft dimensions
please refer to the table below.
For a
quotation or further information / assistance please
contact us.
Please click for standard stock
dimensions
Goods Lift range
- 250kg & 300kg
Whether you are lifting beer barrels, sack
barrows, large roll containers or washing machines, you can choose either the
250kg or 300kg model to suit your exact lifting requirements.
Our goods lifts operates inside a self
supporting frame which requires minimal builders work and eliminates the need
for a motor room or a load bearing well.
Most models are available within 5 -10 working
days and can generally be installed within 5-10 working days.
Up to three-way entry on every floor to provide
most convenient access positions.
The standard goods lift can be supplied with
concertina shutter leaf gates with a galvanised finish or if preferred single
hinged steel doors with grey baked enamel finish. To protect loads during
travel
a collapsible picket gate if available if required.
The goods lifts will operate on either 415V 3
phase or 240V single phase. If you require the lift to operate on 240V single
phase the carrying capacity is reduced 180kg.
To select the model to suite the on-site shaft
dimensions please refer to the table below.
For a
quotation or further information / assistance please
contact us .
Please click for standard stock
dimensions
|
1000kg - 5000kg
This is a standard large goods lift,
for further details please
contact us.
|
We can supply and install a range of electric
goods only service lifts to cater for every lifting requirement, from food,
laundry and documents to beer crates and barrels, small trolleys and industrial
equipment.
The service lifts will operate on either 415V 3
phase or 240V single phase.
