Service / Goods lifts

Service Lift Range - 50 & 100 kg

We can supply and install a range of electric goods only service lifts to cater for every lifting requirement, from food, laundry and documents to beer crates and barrels, small trolleys and industrial equipment.

Our service lifts operates inside a self supporting frame which requires minimal builders work and eliminates the need for a motor room or a load bearing well.

Most models are available within 5 -10 working days and can generally be installed within 5 working days.

Up to three-way entry on every floor to provide most convenient access positions.

The finish of a car and shutters can be tough grey baked enamel or stainless steel.

The service lifts will operate on either 415V 3 phase or 240V single phase.

To select the model to suite the on-site shaft dimensions please refer to the table below.

For a quotation or further information / assistance please complete the enquiry form.

 

	Please click for standard stock dimensions

Goods Lift range - 250kg & 300kg

 

Whether you are lifting beer barrels, sack barrows, large roll containers or washing machines, you can choose either the 250kg or 300kg model to suit your exact lifting requirements.

Our goods lifts operates inside a self supporting frame which requires minimal builders work and eliminates the need for a motor room or a load bearing well.

Most models are available within 5 -10 working days and can generally be installed within 5-10 working days.

Up to three-way entry on every floor to provide most convenient access positions.

The standard goods lift can be supplied with concertina shutter leaf gates with a galvanised finish or if preferred single hinged steel doors with grey baked enamel finish. To protect loads during travel a collapsible picket gate if available if required.

The goods lifts will operate on either 415V 3 phase or 240V single phase. If you require the lift to operate on 240V single phase the carrying capacity is reduced 180kg.

To select the model to suite the on-site shaft dimensions please refer to the table below.

For a quotation or further information / assistance please complete the enquiry form.

Please click for standard stock dimensions

1000kg - 5000kg

Depicted below is our standard large goods lift for further details complete our enquiry form.